MCA 225 GEN 2 Specifications
POWER OUTPUT (PER CHANNEL)
(Continuous RMS, 20 Hz - 20 kHz, <1% THD)
Impedance
8Ω 225 W
4Ω 400 W
2Ω 600 W
INPUTS / OUTPUTS
Inputs
Single-Ended, Balanced, Relay Trigger (3.5-mm Mono Jack)
Outputs
Speaker Binding Posts, Relay Trigger (3.5-mm Mono Jack)
SWITCHES
Front Panel
Power (On/Off)
Rear Panel
3 On/Off Modes (Trigger, Manual, Auto)
THD at 100W
at 1 kHz
0.0010%
at 20 kHz
0.015%
IMD at 100 W
ITU-R (19 kHz + 20 kHz)
0.0005%
SMPTE (60 Hz + 7 kHz)
0.002%
Frequency Response, 20 Hz to 20 kHz
open circuit
± 0.1 dB
8Ω
± 0.1 dB
4Ω
± 0.1 dB
2Ω
± 0.2 dB
OTHER SPECIFICATIONS
SNR, IEC-A, ref. 225 W
120 dB
Power Bandwidth, -3 dB at 200 W into 8 ohms
90 kHz
Slew Rate
30 V/μs
Damping Factor, 20 Hz to 1 kHz
300
Channel Separation, 100 Hz to 10 kHz
>65 dB
Input Impedance (RCA / XLR)
10 kΩ / 15 kΩ
Input Sensitivity, 225 W into 8 Ω
1.5 Vrms
Voltage Gain
29 dB
POWER CONSUMPTION
standby
idle
typical
high output
MCA 525 (Gen. 2)
2.0 W
80 W
550 W
1200 W
MCA 325 (Gen. 2)
1.4 W
47 W
350 W
750 W
MCA 225 (Gen. 2)
1.0 W
35 W
240 W
500 W
DIMENSIONS
Height
6-5/8” (16.9 cm)
Height with Rackmount Kit
4U
Width
17-1/4" (43.9 cm)
Depth
18-1/8" (46 cm)
WEIGHT
MCA 525 (Gen. 2)
61 lb (27.5 kg)
MCA 325 (Gen. 2)
43 lb (19.5 kg)
MCA 225 (Gen. 2)
40 lb (18 kg)
POWER REQUIREMENT
120 V version:
In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz.
220-240 V version:
In countries where the line voltage is 220, 230, or 240 V, this product operates from a single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz.
